Chevelle LED Headlights Outer LED Halo headlights. Inner old Halogen headlights LED Halo This shows the potential interference with the rubber boot. Not required to trip to make room, but I wanted to ensure the integrity of the boot. Front side of bucket. Notch at top was cut deeper to allow for LED Halo wires to clear without rubbing. Note the cut out at 12 o’clock for the LED Halo wires. Showing how it will look when installed. You can see the hole is larger than needed and the LED Halo control wires exiting. Closeup of notch for the LED Halo wires. Placement is for optimal routing of the wires to the engine compartment. Closeup of notch for the LED Halo wires. Closeup of notch for the LED Halo wires. Driver side, rear view from beside the battery. Driver side, rear view from beside the battery. Passenger side, rear view. That is the horn at the top. Passenger side, rear view. That is the horn at the left side. Headlight color is white with a tinge of blue, pattern seems close to or better than old halogens LED headlights in the alley, low beams only. Headlights off on a street with no lights Headlights on, same street as above Here’s how the halo and flasher work together.